+86 15998314917 (Estelle)
    sales03@yushindt.com  
Hot products:Thickness Gauges | Ultrasonic Flaw Detectors | Coating Thickness Gauges | X-Ray Film Viewers
   Categories
   Contact Us
Address:No.9, Shenbei Road,
Shenbei New District,
Shenyang, China 110136
Phone: +86 15998314917
E-mail: sales03@yushindt.com
 
 
   UM-1 Series Ultrasonic Thickness Gauges
UM-1 Thickness Gauges
Product Name:  UM-1 Series Ultrasonic Thickness Gauges
Model:  UM-1/UM-1D
Views:  

Application::  UM-1 series ultrasonic thickness gauges is used for measuring Metal and Nonmetal Materials, include Plastic, Steel, PVC and Glass Plates and Pipes. It can be widely used in the fields such as manufacturing and metal processing, etc. It can also make detection on various kinds of pipes and pressure vessels of the manufacturing facilities about their thickness lossing after corrosion.

 

Brief Introduction:  0.1mm/0.001inch Resolution, 500 Thickness Values can be stored, Alarm Mode, Minium Capture, Two-point Calibration, Automatic V-Path Correction and Thru Painting Function etc.

   
UM-1 Thickness Gauges
 
Main Features

► 0.1mm or 0.001 inches resolution
► Measuring range:0.8-300mm
► 128×64 pixels display with backlit
► 500 thickness readings can be stored
► Hi-Low alarm setting
► Minimum thickness capture
► V-sound path correction
►Through paint/coatings(UM-1D)

 
Theory Of Through Paint/Coatings
 
UM-1 Thickness Gauges
We developed first through paint/coating ultrasonic thickness gauge of Chinese make in 2006.
UM-1D has the ability to measure through and eliminate the thickness of paint or coatings on the surface of measured material.
In normal measurement mode, the time interval-T1 is between transmitted pulse and first back wall echo(coating thickness is included).
In through paint/coatings measurement mode, the time interval-T2 is between two successive back wall echoes( coating thickness is excluded)

 
Specifications
 
Display Type
12864 dot-matrix LCD screen with EL backlight
Operating Principle
P-E (pulse-echo), E-E (echo-echo) with dual-crystal probes(Only for UM-1D)
Measuring Range
Standard mode: 0.8mm to 300mm, depanding on material and probes
Thru coating mode: 3mm to 20mm with PT-08 probe(Only UM-1D)
Measuring Limits of Tube(Steel)
∮20mm×3.0mm(PT-08 probe)
∮15mm×2.0mm(PT-06 probe)
The measuring error is up to ±0.1mm
Measuring Error
Low Limit to 10mm: ±0.1mm
10mm to high limit: ±(1%H+0.1)mm
Repeatability
0.1mm
Display Resolution
0.1mm, 0.001inch
Units
inch or mm
Calibration Mode
Zero Calibration, Two-point Calibration
V-Path Correction
Automatic
Update Rate
4Hz
Velocity Range
1000 to 9999 m/s(0.0394 to 0.3937 in/μs)
Memory Function
500 readings can be stored in 5 groups
Minimum Value Checking
Move the probe along the surface of the testing material, the gauge is able to find the thinnest point automatically.
Warning Function
If the measured value exceeds the pre-set limit, the warning tone will be start.
Velocity Storage
Total 5 different materials velocitiescan be stored.
Languages
English and Chinese
Communication Port
USB or Serial RS232 Port(Optional)
Application Software
UmView software for transmission, storage, analysis and documents editing(Optional)
Power Requirements
Two 1.5V AA alkaline batteries(Warning with low battery voltage)
Operating Time
Up to 200 hours with alkaline batteries(wihtout backlight)
Instrument Shut-Off
AUTO OFF after 5 minutes of inactivity
Operating Temperature
-10℃ to +50℃, -20℃ in special requirements
Standard Configuration
UM-1 Ultrasonic Thickness Gauge,Probe, Instrument Case, Operating Manual, Certification, Pcking List
Optional Accessories
Various Probes, Probe Cables, Step Calibration Blocks, Communication Software and Rubber Bumpers.
 
 Product Details

UM-1 Thickness Gauges
UM-1 Thickness Gauges
 
Function Comparisons
 
Model
UM-1
UM-1D
UM-2
UM-2D
Operating Principle
Pulse-Echo
Pulse-Echo
Echo-Echo
Pulse-Echo
Pulse-Echo
Echo-Echo
Measuring Range in Standard Mode
0.8mm-300mm
0.8mm-300mm
0.8mm-300mm
0.8mm-300mm
Measuring Range in Thru Coating Mode
×
3mm-20mm
×
3mm-20mm
Resolution (inch)
0.1mm, 0.001
0.1mm, 0.001
0.1mm, 0.001
0.1mm, 0.001
Probe Compensating Line
1 built-in
1 built-in
1 built-in
1 built-in
Data Logger

Transducer Options 
 
Model
PT08
PT06
PT04
ZT12
GT12
Type
Common
Small Tube
Fingertip
Cast iron
H-Temperature
Frequency
5MHZ
7.5MHZ
10MHZ
2MHZ
5MHZ
Diameter
11mm
8mm
6mm
17mm
15mm
Range
0.8-100mm
0.8-30mm
0.7-12mm
4.0-508mm
4.8-80mm
Temperature
-10 ~70℃
-10 ~70℃
-10 ~70℃
-10 ~70℃
-20 ~450℃
Photo
UM-1 Thickness Gauges
UM-1 Thickness Gauges
UM-1 Thickness Gauges
UM-1 Thickness Gauges
 UM-1 Thickness Gauges
 
 
 
 

Add:No.9, Shenbei Road, Shenbei New District, Shenyang, China 110136

You can also leave your contact information to us, so we can offer

our better and faster services to you.

CONTACT US

Mobile : +86 15998314917    

Email    : sales03@yushindt.com